// STUDY TRAINING · OT-CRASH · 1 DAY · HARDENING
Control Network Hardening Crash Course
One day for the person who owns a control network and cannot give it three. The ten changes that do most of the work on a plant, utility, or building automation network: find what is on it without scanning it, draw the zones, lock the switch management plane, cut the vendor modem, and back up the PLC programs. Demonstrated live on industrial hardware, with a checklist to take back on Monday.
What you will be able to do
- Explain Purdue levels and IEC 62443 zones well enough to draw your own site on a whiteboard, with the industrial DMZ in the right place.
- Build an asset inventory from a span port and a passive capture, without sending a packet at a PLC.
- Name the ten switch and firewall changes that close the common exposures, and the order to make them in without stopping production.
- Recognise Modbus, EtherNet/IP, DNP3, and BACnet on the wire and know which ones have no authentication at all.
- Replace the cellular modem behind the panel with vendor remote access through a jump host, and say why.
- Leave with a dated checklist, the backup plan for PLC programs and switch configurations, and the questions to ask before anyone patches anything.
The day
From flat to defensible
- 9:00 The control network as it is
Purdue levels, IEC 62443 zones and conduits, the industrial DMZ, and 3 real site topologies with the exposures marked.
- 10:30 Inventory without scanning
Span ports, passive capture, Modbus and EtherNet/IP decoded live, and the inventory sheet the afternoon works from.
- 13:00 The ten changes
Management plane lockdown, segmentation, conduit firewall rules from the protocol list, storm control, port security, NTP and syslog, demonstrated vendor-neutral, with Cisco IE as the example.
- 14:45 Remote access and the Windows boxes
Jump host with session recording, vendor access windows, and the minimum hardening for HMI servers and engineering workstations inside the vendor matrix.
- 16:00 Your Monday checklist
Each participant leaves with a dated list of changes for their own site, the backup plan, and the order to make them in.
Dates
Control Network Hardening Crash Course runs 9:00 to 16:30 Eastern on each date below. Pick a date to register.
Who this is for
Plant and facilities IT, controls technicians, operations managers who inherited the network, and MSPs asked to quote on securing one.
Prerequisites. None. Comfortable with IP addressing helps. The 3-day Hardening Control Networks course is the full version.
What is included
- The ten-change checklist, the zone worksheet, and the switch baselines as files
- A copy of the free OT Networks and Network Hardening courses for review afterward
- A credit of the crash course fee against the 3-day Hardening Control Networks course within 6 months
- Certificate of completion with contact hours
What this is not
Not a PLC course. You watch the changes made and leave with the list. The 3-day Hardening Control Networks course goes further on each one.
Free courses that pair with it
Book a seat for 18 December 2026
Send a message with the number of seats and who is attending. Your seat is confirmed by reply and the invoice follows. Groups of 4 or more can ask for private delivery on their own site instead.