// STUDY TRAINING · SI-101 · 3 DAYS OR 6 TO 8 EVENINGS · FOUNDATIONS

Security Integrator Fundamentals

The ground a security technician works on, in the order a job runs. Design considerations and the site survey, low-voltage power that holds up at the far door, data cabling and the network basics, installation methods and the habits that make an install clean, then access control, intrusion, and video configured, commissioned, and handed over. Vendor-neutral, taught live with worked examples from real sites.

What you will be able to do

  • Walk a site, ask the client the right questions, and turn the answers into a device layout and a riser for access control, intrusion, and video.
  • Size low-voltage power and batteries from the device list, and work out voltage drop before the cable is pulled.
  • Pick the right cable for each run, terminate and test copper to the standard, and know when the run needs fibre.
  • Plan pathways, mounting, and cable management so the install passes inspection by the authority having jurisdiction and still looks right in year four.
  • Configure a door, an alarm panel, and a camera to a working baseline, and explain fail-safe and fail-secure to the client.
  • Commission, label, and document a system, troubleshoot it in a structured order, and hand it over with as-builts the client can use.

Day by day

DAY 1

Design and low voltage

  • Part 1
    Design considerations

    The site survey, the client requirements and the threat behind them, door and zone schedules, camera coverage goals, device selection, and drawing a layout and riser someone else can install from.

  • Part 2
    Low-voltage power

    Power supplies, battery standby, voltage drop worked by hand, centralized versus distributed power, PoE as a power source, grounding, and why the far door browns out.

  • Part 3
    Coordinating with the other trades

    Door hardware and the locksmith, the electrician and the fire alarm interface, the IT department, and the questions to settle with the authority having jurisdiction before rough-in.

DAY 2

Data and installation

  • Part 1
    Data cabling

    Cat6 and Cat6A, shielded or not, terminations done to the standard, testing and what the tester report means, fibre basics, and channel length limits.

  • Part 2
    Network basics for security

    IP addressing and subnets, switches and PoE budgets, VLANs that keep cameras and controllers off the business network, and what to hand the IT department.

  • Part 3
    Installation methods and basics

    Pathways, conduit, J-hooks and cable tray, firestopping, mounting heights and backboxes, door prep and electrified hardware, labelling, service loops, and working safely on ladders and lifts.

DAY 3

The systems, commissioning, and handover

  • Part 1
    Access control and intrusion

    Readers, controllers, credentials, locks and request-to-exit, fail-safe and fail-secure, then panels, zones, sensor placement, partitions, user codes, and communication paths that do not generate false alarms.

  • Part 2
    Video surveillance

    Lenses and field of view, placement that covers the scene, recorders and VMS, storage and retention math, bandwidth, and exports that hold up.

  • Part 3
    Commissioning and handover

    Testing every device, as-builts and documentation, structured troubleshooting worked through staged site faults, and a handover the client can live with.

Dates

Security Integrator Fundamentals usually runs in the evening, two nights a week over 3 to 4 weeks. The December run is daytime, 14 to 16 December, 9:00 to 16:30 Eastern. Pick a date to register.

Who this is for

New technicians and apprentices entering security integration, career changers from electrical, IT, or low-voltage trades, and integrator staff who want one standard for how the team installs.

Prerequisites. None. The free Security Integrator Level 1 course is a useful warm-up.

What is included

  • The course workbook, the site survey form, the power and voltage drop worksheet, the commissioning checklist, and the handover template as files
  • A copy of the free Security Integrator and CCTV Fundamentals courses for review afterward
  • Certificate of completion with contact hours

What this is not

Not a manufacturer certification and not a single-platform course. Brand-specific programming is left to the manufacturer training. Network Fundamentals for Security Integrators and Datacom Fundamentals for Security Integrators go much further on the network and the cabling.

Free courses that pair with it

Book a seat for 14 to 16 December 2026

Send a message with the number of seats and who is attending. Your seat is confirmed by reply and the invoice follows. Groups of 4 or more can ask for private delivery on their own site instead.