// GENETEC SECURITY CENTER · FAQ · HANS STUDY

Genetec Security Center questions, answered

These are the questions integrators, security managers, and IT teams ask most often about Security Center. The answers come from independent field experience, with no licence revenue behind them, and each links to the longer treatment where one exists.

Architecture and roles

What is Genetec Security Center?

Security Center is Genetec's unified platform for video, access control, and related systems, run from one set of servers and one operator client. Omnicast is the video side, Synergis is the access control side, and AutoVu covers licence plate recognition. Under the application it is a set of Windows servers, a SQL Server database, and the network that connects them, which is why most problems end up being server or network problems. The Genetec hub lists everything on this site.

What does the Genetec Directory role do?

The Directory is the core of the system. It hosts the Security Center database, handles licensing, authenticates users, holds the configuration, and acts as the hub every other role talks to. If the Directory is down, the rest of the system cannot function, so it deserves the most careful placement and the first failover plan. The architecture and roles article covers placement.

What does the Archiver do, and what is an Auxiliary Archiver?

The Archiver discovers, controls, and polls the cameras and other video units, and records and serves their video. An Auxiliary Archiver is an extra recording role that extends the main Archiver, typically for additional storage or capacity. Archiver sizing depends on camera count, resolution, frame rate, codec, and retention, and the video drives should be separate from the operating system. The storage and retention design article shows the arithmetic.

What is the Media Router for?

The Media Router relays live and playback video streams between cameras or Archivers and the clients that request them. It matters most when clients sit on different network segments than the cameras, or when firewalls sit in between. Stale Media Router redirect settings left over from an old upgrade are a common cause of poor video performance. The top Security Center issues article has the pattern.

What do the Access Manager and Health Monitor roles do?

The Access Manager role runs the access control side, managing the door controllers and processing their events. The Health Monitor collects health data from the roles and units, detects faults and offline conditions, and raises alarms. Health Monitoring is not in the critical path for recording or door control, but without anyone watching it, failures go unnoticed.

What is the difference between Config Tool and Security Desk?

Config Tool is the administrator's application for building and changing the system, and Security Desk is the operator's application for live monitoring, playback, alarms, and investigations. Both are client applications that connect to the Directory. Operators should not need administrator rights on the workstation or in the application, a point that comes back under hardening.

Should I run all Genetec roles on one server?

A small system can run its roles on one server, but larger systems should separate them, with the Directory on its own server and Archivers on servers built for recording. Role stacking is a design mistake that tends to pass commissioning and degrade under load. Where you draw the line depends on camera count, retention, and how much the Directory matters to the business.

What is the difference between federation and a single distributed system?

In a federation each site stays an independent Security Center system, and a parent system surfaces their cameras and events to central operators. A single distributed system is one system with several Archivers and servers under one Directory. Federation suits sites that need their own administration or sit behind unreliable links, and cardholder data does not sync between federated sites unless you set that up separately.

Is Genetec better than Milestone or Avigilon?

Neither is better in general, and the right answer depends on the sites, the integrations, the access control and video mix, and who will run it. Compare them on architecture, operating model, and the network and server work each requires, not on feature lists. The Genetec, Milestone, and Avigilon comparison sets out the questions to ask.

Servers, SQL, and Active Directory

Does Genetec Security Center need SQL Server?

Yes, the Directory database runs on SQL Server, and the installer can deploy SQL Server Express for you. Express has a 10 GB database size limit, so busy systems outgrow it, and a Directory on Express near that limit can fail an upgrade. Anything federated, large, or business-critical belongs on Standard. The SQL Server article covers memory caps, maintenance, and event retention.

Can Genetec Security Center integrate with Active Directory?

Yes. Active Directory handles authentication and Security Center maps group membership to roles and privileges, which gives you central account management and a reliable audit trail. The servers should be domain-joined so that Kerberos is used, clocks need to agree with the domain controller, and the servers need to resolve domain names through the domain's own DNS. See Security Center and Active Directory for OU structure and service accounts.

How should I size storage for Genetec video?

Work from the number of cameras, the bitrate each one produces, the hours recorded per day, and the days of retention, then add headroom. Design the storage for sustained write performance as well as capacity, and keep video drives separate from the operating system. The Archiver storage and retention design article walks through the calculation.

How do I back up Genetec Security Center?

Use the Server Admin backup schedule for the Directory and role databases, write the backups to a different volume than the database files, and copy them off the host. A backup counts only once you have restored it somewhere and opened the system. Take a fresh set immediately before any upgrade, since rollback is a restore.

Upgrades and versions

What is the latest version of Genetec Security Center?

Security Center 5.14 is the current line this site tracks, and 5.14.0.0 was released on 12 May 2026. Genetec ships new minor versions roughly every 6 to 10 months with more frequent updates between them, so check the Genetec TechDocs build numbers page for the current build. The 5.14 outlook covers what changed.

Should I upgrade to Security Center 5.14 now?

Move to the current 5.14.x build rather than 5.14.0.0, and give any new major release 30 to 60 days after release to prove itself. The exceptions are a security advisory that sets a minimum version, a feature you need, or a new deployment with no production system to break. The upgrade runbook lays out pre-flight, the order on the night, and the rollback decision.

What changes in Security Center 5.14?

The Web App replaces the Web Client as the only web-based client, the media component runs as 64-bit, custom privilege templates make fine-grained roles easier to manage, and Microsoft Entra OAuth is supported for SMTP email. The Directory also reports time drift of more than 10 seconds against failover and expansion servers. The Web Client change is the one that generates the most calls, so tell operators before the upgrade.

Is Security Center 5.9 end of life?

Yes. Security Center 5.9 stopped receiving updates and security patches in December 2025. Nothing breaks that day, but vulnerabilities found later are fixed only in supported versions. The 5.9 end of life article explains the risk, and the migration paths reference shows the supported routes.

Can I upgrade straight from an old version to 5.14?

Often not. Some older versions need an intermediate hop, and the oldest component in the system sets the route, including both ends of any federation. Check the Windows Server and SQL Server versions against the supported matrix too, since a software upgrade can turn into a hardware refresh. The Security Center migration paths page has the routes.

Hardening and encryption

How do I harden Genetec Security Center?

Harden every layer, not just the application. Start with a Windows Server baseline trimmed to what the VMS tolerates, scoped antivirus exclusions, separate least-privilege service accounts, a hardened SQL Server, segmented networks, replaced certificates, and custom privileges in the application. The Security Center hardening baseline is the order I deploy it in, and VMS server hardening covers the server side.

Does Genetec encrypt video streams and communications?

Security Center supports encrypted communications, but a default install does not mean everything is encrypted the way you expect. Fresh installs use self-signed certificates, and the safe posture comes from replacing them with certificates from your own certificate authority and enabling TLS on the Directory and web components. Confirm the result against Genetec's hardening guide for your version, and verify it on the network rather than assuming it.

What antivirus exclusions does Genetec need?

Use scoped exclusions for the Genetec processes, the database paths Genetec documents, and the active video storage volumes, and leave real-time protection on everywhere else. Disabling Defender entirely on a recording server is a common shortcut that leaves the server undefended. The antivirus exclusions reference has the list.

Can I use Windows hardening guidance on Genetec servers?

Yes, as a baseline, but apply it with testing. A stock CIS or DISA STIG baseline can break Genetec in small ways, so apply it, test under load, and document each exception with a reason. The security system hardening guide covers the approach, and the free Windows Hardening Level 1 course teaches the Windows fundamentals.

Does Genetec help with CPCSC or NIST SP 800-171 evidence?

Security Center can support evidence, but the evidence comes from how the servers, accounts, and network around it are configured and documented. Active Directory integration, role-based privileges, and logging give you records of who did what, and a documented hardening baseline shows the controls. A defence supplier with a security system on its network should treat it as in scope for review. Start at the CPCSC page.

Network and ports

What ports does Genetec Security Center use?

The Directory listens on TCP 5500 and the Media Router handles stream requests on TCP 554, according to Genetec's published port documentation. Each role, and each camera or controller brand, adds its own ports, so take the full list from the Genetec TechDocs page of default ports for your version and the roles on each server. Then build firewall rules from that list and from the traffic you observe.

How should the network under Genetec be designed?

Put cameras, controllers, Genetec servers, and operator workstations on their own segments, with the traffic between them and the business network controlled and logged. Camera VLANs should be isolated, and server-to-server and client traffic understood. Many performance problems reported as platform bugs turn out to be network problems. See security network design and the network hardening FAQ.

Troubleshooting

Why is my Genetec system slow or dropping video?

The usual causes are server settings and the network, not the software. Power plan left on balanced, SQL Server memory uncapped, NIC buffers at factory defaults, storage built for capacity rather than write speed, and stale Media Router redirects are the repeat offenders. The top 10 Security Center issues list the fixes, and configuring and tuning Security Center covers the settings.

Why does Security Desk struggle with many video tiles?

A workstation showing many simultaneous streams needs a dedicated GPU with hardware H.264 and H.265 decode, since integrated graphics is not enough for 16 or more streams. Check the display outputs and the cabling too. Security Center 5.14 moved the media component to 64-bit, so any 32-bit-only plugin or decoder on the workstation stops loading after the upgrade.

How can I check the health of my Genetec system?

Work through the same areas a health check covers: architecture, servers, storage, network, monitoring, security, cameras, integrations, and lifecycle. You can self-assess with the Genetec health check checklist, or book an independent Genetec health check that ends in ranked findings. Independent Genetec consulting picks up from there.

Have a Genetec question that is not here? Book a scoping call.